Trim-A-Table TAT50

Trim-A-Table™ TAT50

Versatile panel and siding saw table to accurately various angles and pitches.

  • 5’ Boom allows cuts down to 2 ⁄ 12 pitch on 8” Double Lap siding
  • Dual Wing Supports make it easier to cut wider panels like soffit
  • Saw table extends up to 18’ for long vinyl or fiber cement pieces
  • *Model shown with the optional Steel Folding Legs. Power saw not included.
    Made in the USA

    Features & Benefits

    Hover ⁄ click for product features.

    Boom Length Easy Controls Tape Measures Circular Saw Rear Fence Memory Stops Dual Deck Extensions Dual Feature Protractor Recessed Saw Track

    1. Boom Length

    Comes standard with a 5’ Boom to accommodate most siding material

    2. Easy controls

    Controls and adjustments are always in reach. The single-point locking control ensures multiple positioning of the boom without bending or reaching into the path of the saw to make adjustment.

    3. Tape measure

    Built-in tape measures allow easy measurement, that is both quick and accurate.

    4. Circular Saw (Not Included)

    The Trim-A-Table™ allows you to use the 7 ¼" circular saw that you are most comfortable with. Saw can be “dropped” in place ready to go and just as easily removed for transport and storage.

    5. Rear Fence

    Rear fence helps keep material squared and straight. Can be adjusted left and right to accommodate longer materials. Can also be removed to accommodate wider materials as well.

    6. Memory Stop

    Memory stops allow quick-change of the boom position without having to reset angle.

    7. Dual deck extensions

    Dual extensions provide up to 18 feet of material support and have built in tape rules for quick referencing of most measurements.

    8. Dual Feature Protractor

    Provides both degree and pitch angles. Works both left and right

    9. Recessed Saw Track

    Recessed saw blade track which means you get full material support on both sides of the blade while never cutting through the table-top

    Easy Portability
    Easy Portability Icon

    Easy Portability

    lightweight and sets up fast on any job site or in the shop. Durable aluminum components, along with stringent manufacturing controls ensure the longest service life of any saw table out there. Entire unit breaks down quickly for single-user portability and setup.
    Recessed Saw Track
    Recessed Saw Track with Quick “Drop-In” Feature Icon

    Recessed Saw Track with Quick “Drop-In” Feature

    5-foot boom allows for cuts as shallow as 2 ⁄ 12 pitch and has a recessed saw blade track which means you get full material support on both sides of the blade while never cutting through the table-top. For convenience, your saw can be “dropped” in place ready to go and just as easily removed for transport and stowage
    Memory Stops
    Memory Stops Icon

    Memory Stops

    ensures accurate cuts with the built in protractor and pitch guide. Memory stops allow quick-change of the boom position without having to reset angle.
    DETAILS
    The Trim-A-Table™ 50 was the original siding saw table designed to accurately cut vinyl, fiber cement and many other siding materials. To make you faster and more efficient, we added material stops for desired length and memory stops for the desired angle ⁄ pitch. Whether you are cutting vinyl siding, soffit, or fiber cement, the Trim-A-Table™ 50 is the perfect piece of equipment to get your job done fast.

  • Easy to use controls with adjustments always in reach
  • Dual Table Extensions provide material support up to 18’ long.
  • Dual Scale Protractor that provides angles and pitches
  • Fully captures 7” - 8” circular saws
  • WARRANTY

    1 Year Manufacturer's Limited Warranty

    Van Mark Products Corporation warrants this product against defects in material or workmanship for or a period of 1-year from the date of original purchase. For details, click here.

    DOCUMENTS & VIDEOS

    Documents

    Videos

    PDFParts List

    For Sales Literature on our Brakes and Accessories, see our Media Package page